|
Title
Development and characterization of electrospun nanofiber membranes from Polyamide-6/cellulose acetate polymers for filtration applications
Authors
MUSTAFA YAZICI, İSMAIL TİYEK, MEHMET BARAN KALIN, ÖMER ÖNAL and NESRIN KORKMAZ
Received
May 15, 2026
Published
Volume 60 Issue 7-8 July-August
Keywords
membrane, filtration, electrospinning, nanofiber, Polyamide-6, cellulose acetate
Abstract
The increasing demand for high-performance water purification systems has intensified research into advanced filtration
materials. In this study, composite nanofiber membranes based on Polyamide-6 (PA6) and cellulose acetate (CA) were
fabricated to combine the mechanical strength of PA6 with the hydrophilic and biodegradable characteristics of CA.
PA6/CA blend solutions were prepared at weight ratios of 100/0, 75/25, 50/50, 25/75, and 0/100. The morphological and
structural characterizations of the electrospun membranes were performed using Scanning Electron Microscopy (SEM)
and Fourier Transform Infrared Spectroscopy (FTIR). SEM analyses showed that the addition of CA increased the
average nanofiber diameter and promoted the formation of more-beaded nanofiber surfaces. Permeability tests revealed
that pure water permeability decreased markedly with decreasing CA content, whereas air permeability increased
substantially with increasing CA content. These findings demonstrate that the synergistic interaction between PA6 and
CA plays a critical role in determining both the structural integrity and filtration performance of composite membranes,
and that PA6/CA composite nanofiber membranes produced by electrospinning have good potential for efficient, costeffective, and scalable filtration material applications.
Link
https://doi.org/10.35812/CelluloseChemTechnol.2026.60.80
|