Cellulose Chemistry and Technology

ADVANCES IN THE CHEMISTRY, PHYSICS AND TECHNOLOGY
OF PULP, PAPER AND CELLULOSE-BASED MATERIALS

ISSN 2457-9459 (Online)
ISSN-L 0576-9787 (Print)


2023

Journal Citation Reports
Impact factor 2023: 1.3
5-Year Impact Factor: 1.2
Article Influence® Score: 0.140
Ranked 9 out of 23
MATERIALS SCIENCE, PAPER & WOOD (Q2)

Scopus
CiteScore 2023: 2.3
SNIP: 0.405

SCImago
SJR: 0.264
H-Index: 42
Ranked Q3

 

Title
Comparative effects of natural potash (trona) and sodium hydroxide mercerization on the thermal stability and crystalline structure of coconut coir fiber
Authors
MUHAMMED SANUSI, JAMIU K. ODUSOTE and KAMARDEEN O. ABDULRAHMAN

Received July 4, 2026
Published Volume 60 Issue 7-8 July-August
Keywords coconut coir, mercerization, trona, sodium hydroxide, X-ray diffraction, thermogravimetric analysis, crystallinity index, natural fiber composites

Abstract
Coconut coir is an abundant lignocellulosic by-product whose use as a polymer-based composite reinforcement agent is hindered by the hydrophilic nature of its major components: cellulose and hemicelluloses, and by its surface layer of waxes and pectins, which prevent bonding with hydrophobic polymer matrices. Alkaline treatment (mercerization) with sodium hydroxide (NaOH) is the usual solution, but this reagent is produced by energy-intensive chlor-alkali electrolysis, leaving a strongly caustic effluent that must be neutralized before discharge. In this study, a locally sourced natural alkali traded in West Africa as “Kaun” was identified by X-ray diffraction as predominantly trona, Na₃(CO₃)(HCO₃)·2H₂O (93 ± 2 wt%), and evaluated as a sustainable alternative to NaOH. Coir was mercerized at three concentrations (5, 10 and 20 g/dm³) for 4 h using both reagents, and characterized by attenuated-total-reflectance Fourier-transform infrared spectroscopy (ATR–FTIR), X-ray diffraction (XRD) and thermogravimetric analysis (TGA/DTG). FTIR showed that the acetyl C=O band of hemicelluloses at 1733 cm⁻¹ was eliminated by both treatments, while the lignin bands at 1599 and 1509 cm⁻¹ persisted, establishing that both reagents remove surface hemicelluloses selectively, without complete delignification. NaOH gave a higher crystallinity index (CrI) than trona at every concentration used, peaking at 27.5% at 10 g/dm³, causing over-mercerization at 20 g/dm³. The highest Tₘₐₓ (420 °C) occurred at 20 g/dm³ NaOH. The findings establish 10 g/dm³ NaOH as optimum and confirm trona as a viable natural alkali for coconut coir fiber treatment.


Link https://doi.org/10.35812/CelluloseChemTechnol.2026.60.74

- Full text available Download



Reviewer Information

Editor Information